Lewitt LCT 540 S Studio Performance Condenser Mic
Specifications
| Return Postage Will Be Paid By | Buyer |
| Returns Accepted | Returns Accepted |
| After Receiving The Item, Your Buyer Should Cancel The Purchase Within | 30 days |
| Brand | Lewitt |
| Form Factor | Condenser Microphone |
| Model | LCT 540 S |
| Connectivity | XLR 3 Pin |
| Diaphragm Size | Large |
| MPN | 847986001856 |
| Transducer Type | Condenser |
| Suitable For | Studio Recording |
Lewitt LCT 540 S Studio Performance Condenser Mic Store Feedback Subscribe Lewitt LCT 540 S Studio Performance Condenser Mic Summary Lewitt’s LCT 540 S is built to record any sound source at an exceptionally high level of detail and it does so very well! A an outstanding go-to microphone for studio work, as it can capture every subtle nuance of the sound source, therefore delivering natural and detailed sound. Of course, it can also be used for many stage applications, for example cymbals, amplifiers, overheads, background vocals, acoustic instruments, and more LCT 540 S – 1“ True Condenser Microphone for Ultra-Details Recordings The LCT 540 S is built to record any sound source at an exceptionally high level of detail . In doing so, it will retain the musical character of the sound source . This 1” true condenser studio microphone was developed in close cooperation with world renowned producers and audio engineers; first and foremost, to be an outstanding vocal microphone. Naturally, thanks to its specifications, it is suitable for almost any application Your mic for ultra-detailed studio recordings. Our unique approach towards electronics and capsule design makes the microphone better than human hearing. With the LCT 540 S, we set a new benchmark in terms of capturing fine-grained details of your recording source. Record details of your voice and instruments that usually wouldn’t even be audible. Make every detail count.Fit for extreme processing Even the subtlest nuances sound crystal clear. With its cutting-edge circuit and capsule design, the LCT 540 S features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal. Material recorded with the LCT 540 S is fit for extreme processing.How is this mic better Self-noise values below the threshold of human hearing. Our hearing threshold is very frequency-dependent. It is less sensitive towards low and very high frequencies and most sensitive around 2 – 5 kHz. With our specific and unique approach towards circuit and capsule design, we were able to realize self-noise that’ll stay below the threshold of hearing across the entire frequency spectrum.Lewitt had to elevate measurement to a new level. To measure the self-noise of the LCT 540 S, Lewitt built a unique device. It’s ten times more massive than conventional ones, weighing over 4500 kg or 9900 lbs in total. This amount of mass will dampen frequencies up to a 1/10,000th of their sound pressure. The frequency range from 20 Hz to 20,000 Hz is dampened by 60 dB, up to 80 dB on the higher frequencies. Every single LCT 540 S undergoes a series of measurements followed by adjustment of the polarization voltage to achieve the same sensitivity in every LCT 540 S we will ever produce. This way, you can form a pair when you buy another one later on. Features 1″ true condenser studio microphoneSelf-noise below the threshold of human hearingIdeal for extreme processingLow-cut filters and attenuationCardioid polar pattern Specifications Type Condenser, externally polarizedAcoustical operating principle Pressure gradient transducer, externally polarizedTransducer Ø 25.4 mm, 1 inDiaphragm 3 micron gold sputtered MylarPolar pattern CardioidFrequency range 20 … 20,000 HzSensitivity 41 mV/Pa, -28 dBV/PaSelf-noise 4 dB (A)Max. SPL for 0.5 % THD 136 dBSPL, 0 dB attenuationSignal / noise ratio 90 dB (A)Dynamic range 132 dB (A)Attenuation 0 dB -6 dB -12 dBLow-cut filterlinear 80 Hz (6 dB/oct) 160 Hz (6 dB/oct)Internal impedance 68 ΩSupply voltage 48 V ± 4 VCurrent consumption 3.6 mAMicrophone enclosure Zinc die castConnector Gold-plated 3-pin XLRMicrophone dimensions 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 inMicrophone net weight 371 g, 13.1 oz Microphones measured according to: IEC 60268-4 | Phantom power according to: IEC 61938 | Noise measurement according to: IEC 60268-1 RETURNS The majority of items that we sell are covered by the Distance Selling Regulations in the UK which gives you 30 working days from receipt of the goods to cancel the contract and return them. There are some items which are not covered by the DSR's including Software and Hardware that includes Software needed for it's operation and Music items (Records, CD's DVD's and so on), (mainly in ear headphones and microphones). If you do wish to return an item then please contact us and we'll give you the relevant information - buyers are responsible for the cost of shipping items back to us and also for ensuring they arrive back to us in good condition. If the returned items arrive back to us in a damaged state, or the product's original box/packaging is damaged, we reserve the right to deduct an amount from the refund in order to compensate for the damage. This amount will be decided by our staff after inspection of the items. If you have received an item and it is faulty then please get in touch straight away. We will do our utmost to sort out any problem quickly and to your satisfaction. Where items are faulty within 7 days from date of purchase, they will be classed as an out of box failure. These items will be collected, and replaced with an identical product (subject to availability of stock). We may ask you to post small, low cost items, such as headphones, back to us. Any items over 30 days old will need to be returned to either our service department, the manufacturer or their appointed agent for warranty repair. We will always advise you of the return address details that you should send the goods to where this is not our normal returns address. SHIPPING We use different couriers depending on the size, weight and value of your equipment: Royal Mail van for smaller stuff or UPS for larger boxes. If we're using a trackable service (Courier, Tracked, Special Delivery) then we send you a tracking number by email when we ship your order so you know what to expect.Shipping services to Mexican and Russian addresses are currently unavailable. For courier deliveries we use a next day service (Mon - Fri only) and they get there over 99% of the time but if you need a timed service for a before 12 or before 10AM delivery then just let us know and we'll get you a reasonable quote. We can also do Saturday deliveries (on items under 2kg only) if you need something for the weekend and you've left it to the last minute (as we all do sometimes)! Northern Ireland and other non-mainland locations might be a two day service and of course the Scottish Islands may be a bit longer again. If you've any questions before you order, please call 0141 882 9900 (Option 2) between 10AM and 5PM (Mon-Fri) PAYMENT METHODS